中文 / English

Company news

————

主營項目:PP、TPE板材,厚塑料板,塑料警示板,警示帶等,塑料為合成的高分子化合物,可實現自由改變形體樣式

The characteristics of PP plastic sheet

點擊次數:   更新時間:17/07/12 09:15:07     來源:www.emdmontecito.com關閉

Polypropylene (PP) extruded sheet is a plastic sheet made of PP resin adding various kinds of functional auxiliaries through extrusion, pressing, cooling, cutting and so on. PP is a semi-crystalline material. It is tougher than PE and has a higher melting point. Due to the PP homopolymer type temperature above 0 ℃ above is very fragile, so many business of PP material is 1 ~ 4% or higher ratio of ethylene content in random copolymer of ethylene copolymer of pliers. Copolymer of PP materials with low heat distortion temperature (100 ℃), low transparency and gloss, low rigidity, but there are have stronger impact strength.

Pp plastic board is a kind of semi crystalline material, it is more hard than PE and has a higher melting point, the treated type copolymer pp material with low heat distortion temperature (100 ℃), low transparency and gloss, low rigidity, but there are have stronger impact strength, so the surface stiffness and resistance to scratch characteristics very well.

The strength of PP increases with the increase of ethylene content. PP vicat softening temperature is 150 ℃. Due to the high degree of crystallinity, the surface stiffness and anti-scratch characteristics of this material are very good. There is no environmental stress cracking problem. The PP is usually modified with glass fiber, metal additives or thermoplastic rubber. The flow rate of PP is in the range of 1 ~ 40. PP materials with low MFR have good anti-impact properties but low tensile strength.

For the same MFR material, the copolymer type is higher than the homopolymer type. Because of crystallization, the shrinkage rate of PP is quite high, generally 1.8 ~ 2.5%. The direction of shrinkage is much better than that of PE - HD. Adding 30% of glass additives can reduce the systolic rate to 0.7%. Both polymer and copolymer PP materials have excellent anti-hygroscopic properties, corrosion resistance and solubility. However, it has no resistance to aromatic hydrocarbons (such as benzene) solvents, chlorinated hydrocarbons (carbon tetrachloride) solvents. PP is not as resistant to oxidation as PE.

Small number: seven

上一條:沒有了
下一條:沒有了
黄网站色视频免费观看_公与熄完整版_PGONE下面很大吗_清纯白嫩大学生正在播放